With the High-Water Shot, you have a user-friendly and efficient flood access protection!
Put together your High Water Shot:
After going through these steps, the optimal height and bearing capacity of the High Water Shot will be calculated, including accessories and services. You will then receive a quote by e-mail that meets the project requirements.
Light weight- Quick installation
- Custom made
- Reusable
- At 1st beams immediately water sealing
- Easy in storage
Product Information
JLD International BV offers an affordable alternative to the modular water bulkhead system. It is also a sustainable solution by using recycled PVC materials with the possibility of reprocessing. It is a self-installing alternative to other makeshift solutions such as sandbags or wooden barriers.
Applicable to:
- Housing
- Stores and malls
- Industrial and storage buildings
- Public spaces (PRO)
- Garages and warehouses
- And many other objects
What is the High Water Shot - LITE made of?
HighWaterSchot-LITE is made of a composite of PVC and integrated fiberglass to reinforce the profiles. This technology allows the material to be compared to lightweight steel products, but with the weight, price and resistance to conditions attributable to PVC.
Elements
Fixed element
1. Uprights
The uprights are made of PVC and their fixing method depends on the site situation. Mount the upright in front of, against, or on the inside of the flood seal opening to ensure water sealing.
Removable elements
2. Flood boards
The type and length of the flood boards depend on the situation at hand and the pressure the system has to bear. Except for the ground beam equipped with ground seal, the planks are identical, which facilitates installation, since it is not necessary to attach them in a predetermined order. At high tide expectation, you simply and quickly slide the flood boards between the uprights.
3. Seals
Renewable EPDM seals are used with all types of flood boards and uprights.
4. Clamping bolt
Tension bolts are used to press the beams firmly together and seal the system together when installed. After installing the flood boards, install and tighten the tensioning bolts to prevent water penetration.
5. The sealing strip
Is fixed in the baseboard. The sealing strip is the first board to be installed.
What does the High Water Shot look like?
At low water
- The uprights are the fixed elements, these can be closed with a cover. This cover is optional.
Storage
- Hangers for the flood shelf. This leaves you with little space needed for storage. The hangers are optional.
At high tide
- Quickly and easily slide the flood boards into the uprights, place the fixture bolts on the top board and tighten.
