The Stanley ID07 Impact/Drill is two hydraulic underwater tools
in one: an impact wrench and a wood drill. The ½" impact wrench
with square drive delivers torque up to 500 ft lbs and can nut
tighten and loosen bolts and drive bearing screws. Use the ID07
with the 05079 Adapter and wood drilling crowns for drilling in wood up to
11/16-inch diameter holes without reactive torque for the
diver. Puller bracket and high-visibility yellow paint are standard.
A suitable design made and delivered for every situation- Innovative and specialized in anchoring techniques
- Safety and quality are paramount at JLD. We are VCA** and ISO 9001 certified!
- Integrated Stanley Hyrevz geared motor
Produces high torque
- Stainless steel spools and fasteners
- Forward-reverse variable speed
- 500 ft lbs/675 Nm of impact torque
- Extra large trigger with protection for
operator comfort
- Wiper seals on reverse and trigger spool
- Built-in check valve ensures long life
seal life
- Plastisol handle for comfortable use
ergonomic handle
- Forward position of handle provides better position
balance
- Open middle/closed middle double
Flush function
- Cast-in lifting eye
| Capacity | ½" / 12.7 mm Square Drive |
| Performance | Torque 500 ft lbs / 675 Nm |
| Flow Range | 4-12 gpm / 15-45 lpm |
| Working Pressure | 750-2000 psi / 50-140 bar |
| Full Relief Setting | 2250 psi / 155 bar |
| Weight | 7.2 lbs / 3.3 kg |
| Length | 10" / 25.4 cm |
| Width | 4¼" / 10.8 cm |
| Hydraulic Ports | -8 SAE O-ring |
| Connect Size and Type | 3⁄8" Male Pipe Adapter |
| Couplers | (See Ordering Information) |
| Hose Whips | (See Ordering Information) |
