The spring on/off valve and adjustable rotation speed allows easy
start-up of the drill and precise operation. The high
torque rotation motor drives standard 736 Skil hex carbide
tipped drill bits and can drill a 2-inch diameter hole
up to 29″ deep. Fluted drills require no water or air
clear holes. Ideal for drilling holes for installing
of anchor bolts. High visibility yellow painted.
A suitable design made and delivered for every situation- Innovative and specialized in anchoring techniques
- Safety and quality are paramount at JLD. We are VCA** and ISO 9001 certified!
- T-handle with large on/off trigger for
precise control
- Stainless steel spools and fasteners
- Forward-reverse with adjustable bit
rotation speed
- Spring-loaded on/off valve provides easy starting
and control
- Uses a 736 Skil fluted drill bit with carbide tip
bits - requires no water/air to remove holes
- Drills holes from ¾" to 2″ to 29″ in diameter
Deep and core drills up to 4″ in diameter
- Works in any position
- Trouble-free drill steel lock holder
| Chuck Capacity | Up to 2" diameter or 4" core bit |
| Steel Capacity | 736 Skil hex |
| Circuit Type | Open Center |
| Flow Range | 7-9 gpm / 26-34 lpm |
| Optimum Flow | 8 gpm / 30 lpm |
| Working Pressure | 1500-2000 psi / 105-140 bar |
| Full Relief Setting | 2250 psi / 155 bar |
| Rotation Speed | 0 - 300 rpm |
| Weight (less tool bit) | 49 lbs / 22.2 kg |
| Length | 24½" / 62.2 cm |
| Width (at handles) | 14" / 35 cm |
| Hydraulic Ports | -8 SAE O-ring |
| Couplers | Varies with model (See ordering information) |
| Hose Whips | Yes ( 3 ⁄8" NPT Male thread) |
